Polyurethane Blade Conveyor V-Plough Plow Belt Cleaner/Scraper

group name: Polyurethane conveyor belt scraper

Min Order: 10 piece

brand name: Hengshui Rongrui Metal Rubber

model: 1220*55*180mm

Nearest port for product export: Tianjin Port, Qingdao Port, Lianyungang Port, Shanghai Port

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW

Acceptable payment methods: T/T, Westem Union

update time: Sat, 23 Dec 2017 16:09:58 GMT

contact supplier

Paramtents

Belt width 600mm, 750mm, 800mm, 1200mm ,etc.
Hardness 60-95 Shore A
Feature High wear-resistant
Usage conveyor belt cleaning syetem

Packging & Delivery

150cm x 120cm x 100cm
Min Order10 piece

Briefing

Mainly used for all kinds of conveyor belt cleaning of cold, heat sulfuration joints and mechanical joints.

Detailed

Polyurethane Blade Conveyor V-Plough Plow Belt Cleaner/Scraper

Conveyor Belt cleaners help remove bulk material product carry back and prevent it from falling off at various points of the conveyor along the return side of the belt causing various housekeeping and conveyor belt maintenance problems.

Carry back can lead to:

•Excessive buildup and wear on conveyor belt idlers and pulleys

•Conveyor belt misalignment due to the artificial crown created by the carry back

•Accumulation of materialfalling off conveyor belt idlers and structure to the ground or on buildings,

vehicles or even people

•Negative and unsafe workenvironment

1. Primary, secondary and V type belt cleaner ( Include blade, steel tube and tension )
2. Suitable for belt width: 500 mm ~ 2000 mm
3. Both integral type blades and segment type blades is available.
4. Material of Blade: Casting Polyurethane (PU) Rubber – High abrasion resistant.

1. A wide range of hardness. It also has rubber elongation and elastic under the high hardness. PU elastomer hardness in the range of share A10-D80.

2. High intensity. Their break strength, tear stength and carring capacity are much higher than the generic rubber under the hardness of rubber. It's impact strengh and bending strengh much higher than plastic's under high hardness.

3. Wear-resistance. It has outstanding wear-resistance and 3-5 times as much as rubber in the general range of 0.01-0.10cm3/1.61km.

4. Oil-resistance. PU elastomer is a strong polar polymer, the non-polar mineral oil affinity small, fuel oil and machinery almost from the erosion.

5. Outstanding performance in Oxygen endurable and ozone-resistant .

6. Good absorber performance, It can do vibration and the role of a buffer. It also can substitute rubber and spring in the modle manufacturing.

7. It has nice low-temperature porformance.

8. Radiation-resistance. PU have good resistant high-energy rays performance and still has a satisfactory performance in the 10-10 radiation.

9. Good machining properties(cars,milling,grind and bore can)