Follow us :

FX 500 FX 300 FX 125 FX 150 polyurethane cyclones

FX 500 FX 300 FX 125 FX 150 polyurethane cyclones
FX 500 FX 300 FX 125 FX 150 polyurethane cyclonesFX 500 FX 300 FX 125 FX 150 polyurethane cyclonesFX 500 FX 300 FX 125 FX 150 polyurethane cyclonesFX 500 FX 300 FX 125 FX 150 polyurethane cyclonesFX 500 FX 300 FX 125 FX 150 polyurethane cyclones
group name
Polyurethane Hydrocyclones for Desander & Desilter
Min Order
10 piece
brand name
Hengshui Rongrui Metal Rubber
model
FX500 , FX300, ETC
Nearest port for product export
Tianjin Port, Qingdao Port, Lianyungang Port, Shanghai Port
Delivery clauses under the trade mode
FOB, CFR, CIF, EXW
Acceptable payment methods
T/T, Westem Union
update time
Sat, 23 Dec 2017 16:45:05 GMT

Paramtents

  • Application Separate the solid particles from drill

  • Inlet Size 75-150mm

  • Treating Capacity 80-130 m3/h(616GPM)

  • Screen Area 1.0m2 ~2.4 m2

  • Outlet Size 125-200mm

  • Pressure 0.15~0.35Mpa

Packging & Delivery

  • 180cm x 150cm x 120cm
  • Min Order10 piece

Briefing

FX 500 FX 300 FX 125 FX 150 polyurethane cyclones

Detailed

FX 500 FX 300 FX 125 FX 150 polyurethane cyclones

The high efficiency liquid/liquid hydrocyclone provides maximum oil/water separation efficiency, and the solid/liquid hydrocyclone is a cyclone clarifier that offers continuous solids removal from liquid. Both can be used in industrial process water, industrial reuse, oil/water separation, and clarification/separation applications.

The liquid/liquid hydrocyclone is one of the most advanced, yet least complicated oil/water separation devices available. It effectively removes free oil and grease in a compact package, at a cost far less than other types of separators. Liquid/liquid hydrocyclones are ideal for oily process water and oil-field produced water applications. 

The solid/liquid hydrocyclone offers effective solids removal in a compact package. It can handle high levels of solids, with removal capabilities down to five micron.Solid/liquid hydrocyclones are ideal for treating oily process water and oil-field produced water, desanding of injection water and for sand jetting systems applications.


Due to the higher recovery rates of the 10, 12, 15 and 20 inch (250, 305, 380 and 500mm) Classifying Cyclones, an optimum amount of fine particles that are washed will be recovered from a dilute stream and transported to downstream dewatering equipment.

Available in 10, 12, 15, and 20-inch (250, 305, 380, 500mm) diameters

Unique lower cone arrangement permits ultra fine separations

Ranging from near 60 to 200 mesh and (0.250 to 0.074mm) D95 separation size

Will increase recovery

Exceptional abrasion resistance

Reaction bonded silicon carbide ceramic in lower cones, nitride bonded silicon, and carbide ceramic in upper sections

Ceramic liners are encased with polyurethane so no steel housings to corrode.